Home > Products > capacitor > GE capacitor > GE Matrix™ Harmonic Filter capacitor

Category

GE Matrix™ Harmonic Filter capacitor

Reduces Harmonics to Meet IEEE;
Eliminates Need For Extensive Systems Analysis ;
Suitable For Use on Multiple Inverter/Drive Applications ;
Can Be Used With Stand By Generators ;

share
GE Metal Enclosed PFC with Harmonic Filters capacitor

GE Metal Enclosed PFC with Harmonic Filters capacitor


Provide power factor correction, voltage support, & harmonic mitigation ;Tuned shunt harmonic filter banks ; Current Limiting fuses ;Galvaneal steel welded enclosures; Isolated control compartments for safety and convenience ; Used for both indoor and outdoor applications ; Low installation
GE Fast Switching PFC capacitor

GE Fast Switching PFC capacitor


Transient free group switching using electronic switching elements ; Provides fast reacting harmonic filtration ; Built in three phase network analyzer measures network parameters including harmonics ; Real time switching (less than 1 cycle) available as an option; Single-phase control available
GE Pole Mounted Equipment capacitor

GE Pole Mounted Equipment capacitor


Pole Mounted Capacitor products are pre-wired, factory assembled, and shipped ready for pole installation with single-phase capacitor units. Racks are made of welded structural aluminum and are suitable for mounting switches and junction box and cable assembly. They have a rating of 150 through 3,60
GE PFC with Harmonic Filter capacitor

GE PFC with Harmonic Filter capacitor


Three phase self-healing metallized capacitors ;Aluminum bus ;Three fuses for each step ; Optional blown fuse indicating lights ;Harmonic filter reactors typically tuned to the 4.7th harmonic; NEMA 3R enclosure
GE  Open Stack Rack Equipment capacitor

GE Open Stack Rack Equipment capacitor


Open Stack Rack Capacitor Banks are most applicable where large blocks of three-phase kilovar are required. Capacitors and auxiliary equipment are installed in welded aluminum racks. Racks are shipped ready for field installation including base and inter-rack insulators, substructures, interconnecti
GE Metal Enclosed PFC  capacitor

GE Metal Enclosed PFC capacitor


These power factor correction equipments are metal enclosed for indoor and outdoor installations. These banks can be located on a distribution feeder as a small padmount or at the workstation site.Banks are shipped ready for installation. Banks can be provided with the following options: oil or vacu
GE Fixed Motor and Pump PFC capacitor

GE Fixed Motor and Pump PFC capacitor


GE's low voltage GEM® type capacitors are designed primarily for the motor requirements of oil field and other pumping installations.GEM assemblies feature multiple capacitor cells with metallized polypropylene film dielectric which provides instantaneous self-healing action and reduced energy loss
GE Fixed PFC capacitor

GE Fixed PFC capacitor


Self-healing metallized capacitors ;NEMA 3/12 enclosure; Low losses, 0.5 watt per kVAR ; UL Recognized Pressure Sensitive Interrupter ;Discharge resistors to reduce voltage to 50 volts or less within 1 minute of de-energization ;Operating temperature range of -40° C to +46° C ;Optional three phas
GE Rack with Harmonic Filter capacitor

GE Rack with Harmonic Filter capacitor


Open Rack Outdoor Harmonic Filter Banks should be considered when power factor correction is desired in a harmonic environment.Provide power factor correction, voltage support, & harmonic mitigation ; Tuned shunt harmonic filter banks (Tuned shunt harmonic filter banks to 600 MVAR) 0.1 to 600 M
GE APEC Relays capacitor

GE APEC Relays capacitor


Available in steps of 4, 6, 8, 10, 12 and 14.UL, CE approvalsMeasurement and display of V,I, KVA, KW, KVAR, PF, COSØ. Individual harmonics of voltage from 3rd to 15th levelCurrent Sensitivity 10mACompletely automatic detection of step sizes and VAR based compensationMonitors and displays informatio
Please Complete the short form below and a A&S sales representatives will contact you shortly. Note: Fields labeled with a * are required.
* Product:
* First Name:
* Last Name:
* Company:
  Phone:
   Fax:
*  Email:
*  Inquiry / Comments
*  Code
 
page run: 51 ms